VHF MARINE TRANSCEIVER

IC-M400BB

USA version

Black Box Transceiver When Space is at a Premium

ZOOM

ZOOM

Black Box Transceiver – Icom Quality. Small Footprint.
Icom’s M400BB is perfect for boats that need a radio but don’t have room on the helm. The M400BB consists of a two-piece black box configuration. Install the full RF black box unit in an out-of-sight place and connect the COMMANDMICIV™, HM-195 to the cockpit or flybridge. The HM-195 allows the operation of all radio functions, including DSC, radio, and hailer horn. HM-195 also utilizes the same user soft key interface for easy operation.

ZOOM

ZOOM

Open

Space-Saving, Two-Piece Configuration

The IC-M400BB consists of a two-piece, black box configuration. All function control including DSC operation, can be made from the COMMANDMIC™, HM-195B/SW, and the RF unit, IC-M400BB, can be installed in an out-of-sight place.

New Intuitive User Interface

The new menu system is shared with Icom's latest models. The bottom line of the dot-matrix display shows the software key functions which can be toggled with the left and right buttons.

Active Noise Cancelling

The built-in bidirectional active noise cancelling reduces background noise to up to 90% and improves both your transmitted voice and incoming call. Hear and be heard more clearly.

10 W Loud Audio, Public Address and Foghorn

The IC-M400BB has a built-in 10 W amplifier that increases the audio output from an additional external speaker. The public address function allows you to make an announcement from the microphone like a loud speaker, and the foghorn can also be emitted from the external speaker.

Built-in Class D DSC

The built-in DSC watch function monitors Ch. 70 (DSC channel) activity, even while you are receiving another channel. DSC functions include: distress, individual, group, all ships, urgency, safety, position request/report, polling request and DSC test calls.

NMEA 0183®

When connected to an external GPS receiver, current position and time are shown on the COMMANDMIC display. When receiving DSC information from another vessel, the radio can transfer it to a navigational device via NMEA 0183 connectivity.

AIS Target Call with MA-510TR/MA-500TR

When connected to the optional MA-510TR/MA-500TR Class B AIS transponder, the AIS target call function allows you to set up an individual DSC call from the MA-500TR.

Other Features

MarineCommander™ compatible
AquaQuake™ water draining function (HM-195B/SW)
IPX7 submersible protection both for IC-M400BB and HM-195B/SW (1 m depth for 30 minutes)
Dual/tri-watch function for monitoring Ch.16 and/or call channel
Priority and normal scan
Supports 4-digit channels

Frequency range	TX	156.025–157.425 MHz
	RX	156.050–163.275 MHz
	Ch. 70	156.525 MHz
Power supply requirement		13.8 V DC nominal (11.7–15.9 V DC)
Dimensions (W×H×D) (Projections not included)	IC-M400BB	216×79×125 mm; 8.5×3.11×4.92 in
Dimensions (W×H×D) (Projections not included)	HM-195B/SW	67.5×144.5×37 mm; 2.66×5.69×1.46 in
Weight	IC-M400BB	830 g; 1.83 lb
Weight	HM-195B/SW	400 g; 14.1 oz
Current drain	TX 25W output	5.5 A Max.
Current drain	RX Max. audio	3.5 A Max.
Sensitivity	Main	0.22 μV typical (at 12 dB SINAD)
Sensitivity	Ch. 70	−5 dBμ emf typ. (1% BER)
Intermodulation	Main	More than 70 dB
Intermodulation	Ch. 70	More than 68 dBμ emf (1% BER)
Audio output power (at 10% distortion, 4 Ω load)		More than 2 W (HM-195B/SW) More than 10 W (RX speaker)
RF output power		25 W, 1 W (High, low)