USB Driver Download

Download the old version

Download Type USB Driver
Model name OPC-478UC
Version Version 1.0F
Update Jul.14.2014
Major changes

Improvement:
Fixed a cloning error that may occur due to a communication error.

There are two different OPC-478UCs:
Previous: No marks on the label.
Current: Has a "B" marked on the label.
Version 1.0F is the USB driver for the previous "unmarked" OPC-478UC.

NOTE:

  • The unmarked OPC-478UC is usable with:
    Microsoft® Windows Vista® (32 and 64 bit)
    Microsoft® Windows® 7 (32 and 64 bit)

    The unmarked cable is NOT usable with:
    Microsoft® Windows® 8 (32 and 64 bit)
    Microsoft® Windows® 8.1 (32 and 64 bit)
  • Version 1.5 is the USB driver for the "B" marked OPC-478UC. Download the 1.5 driver here.
  • Read the installation guide in the folder for details, and for what system environment is required.

Caution:
You cannot use "B" marked and "unmarked" OPC-478UCs together with the Version 1.0F driver.

Note
File Size 4.82MB
File Type zip

Regarding this Download Service.

When using this download service, the implementation, use and/or results of use are the sole responsibility of you using this download service and the equipment. You shall comply with applicable laws and regulatory requirements in the use of this download service and in the operation of the equipment.

Firmware is important data for the basic system control of your equipment. An interruption during downloading or a malfunction may cause a failure in the data re-writing, and your equipment may stop functioning normally. If such a failure of the firmware re-writing results in your equipment not functioning normally, Icom Inc. and its affiliates expressly denies and is free from any and all responsibility arising from the result of damage from such an event.

You agree not to hold Icom Inc. and its affiliates responsible for any damage to your equipment operation or loss of data, or unauthorized use of the equipment, whether intentional or not, as a result of use this download service.